Fethma M Nor

Dr. Fethma M Nor

D.Eng., M.Eng., B.Eng. (Mechanical)

Lecturer | Department of Mechanical Engineering | Faculty of Engineering and Science

Contact Details Telephone: +60 85 630 100 Extn: 2470 | Location: Skylark (SK3)-366 | Email: fethma@curtin.edu.my

Research Interests: Natural Fiber Composites, Biomaterials and Biomechanics, Surface Mount Assembly, Computational Solid Mechanics Analysis

Professional Experience

  • May 2018 – present: Lecturer, Curtin University Malaysia
  • Mar 2016 – April 2018: On temporary leave from academia
  • May 2015 – Feb 2016: Trainee and Independent Researcher, Dongguk University, Seoul, South Korea
  • May 2013 – May 2015: Senior Lecturer, Universiti Tun Hussein Onn Malaysia (UTHM), Parit Raja, Malaysia
  • May 2014 – May 2015: Visiting Researcher, Changwon National University, Changwon, South Korea
  • Dec 2004 – Jun 2005: Assistant Project Engineer, TTM Technologies Malaysia Sdn Bhd, Johor Bahru, Malaysia
  • Aug 2004 – Oct 2004: Assistant Engineer, Beyonics Precision Machining Sdn Bhd, Johor Bahru, Malaysia

Fellowships, Awards, Certifications, Achievements and Appointments

  • Jan 2020 – present: Member, Industrial and External Relations Committee, Faculty of Engineering and Science, Curtin University Malaysia.
  • Oct 2019 – Present: Liaison, Memorandum of Understanding between Dongguk University (Korea) and Curtin University Malaysia
  • Sept 2019 – Present: Liaison, Memorandum of Understanding between Universitas Sebelas Maret (Indonesia) and Curtin University Malaysia
  • Jan 2019 – Dec 2020: Head, Working Group on Innovation and Commercialization, Faculty of Engineering and Science, Curtin University Malaysia.
  • Jan 2019 – Present: Member of Industrial Advisory Panel, Faculty of Engineering and Science, Curtin University Malaysia
  • June 2019 – Present: Examiner of Industrial Internship, Faculty of Engineering and Science, Curtin University Malaysia
  • Aug 2018 – Present: Liaison, Memorandum of Understanding between College of Engineering, Changwon National University (Korea) and Curtin University Malaysia
  • Jul 2018 – Dec 2019: Member, Marketing Committee, Faculty of Engineering and Science, Curtin University Malaysia.
  • Jul 2018 – Dec 2018: Member, Working Group on Innovation and Commercialization, Faculty of Engineering and Science, Curtin University Malaysia.
  • May 2018 – Present: Member of Board of Examination, Faculty of Engineering and Science, Curtin University Malaysia
  • May 2018 – Present: Member of Material and Structure researcher cluster, Faculty of Engineering and Science, Curtin University Malaysia
  • May 2018 – Present: Examiner of Mechanical Engineering Research Project, Faculty of Engineering and Science, Curtin University Malaysia
  • Jan 2018 – Present: Liaison for Global Korea Scholarship for Exchange Students hosted by Changwon National University, Korea
  • Jan 2014 – Dec 2015: Member, Committee of Industrial Training and Mobility, Faculty of Mechanical and Manufacturing Engineering, UTHM.
  • Jan 2014 – Dec 2014: Head, Structural Integrity and Monitoring Research Group (SIMReG), Faculty of Mechanical and Manufacturing Engineering, UTHM
  • Dec 2013 – Jan 2015: Examiner of PhD and Master Candidacy, Faculty of Mechanical and Manufacturing Engineering, UTHM.
  • May 2013 – May 2015: Examiner of Mechanical Engineering Research Project, Faculty of Mechanical and Manufacturing Engineering, UTHM.
  • May 2013 – May 2015: Examiner of Industrial Internship, Faculty of Mechanical and Manufacturing Engineering, UTHM
  • Jan 2012 – Present: Liaison for Global Korea Scholarship for Exchange Students hosted by Dongguk University, Korea

Professional Affiliation

2018 – present: Board of Engineers Malaysia

Professional Activities

  • Jan 2019 – present: Head, Working Group on Innovation and Commercialization, Faculty of Engineering and Science, Curtin University Malaysia.
  • Jul 2018 – present       : Member, Marketing Committee, Faculty of Engineering and Science, Curtin University Malaysia.
  • Jul 2018 – Dec 2018    : Member, Working Group on Innovation and Commercialization, Faculty of Engineering and Science, Curtin University Malaysia.
  • Jan 2014 – Dec 2015  : Member, Committee of Industrial Training and Mobility, Faculty of Mechanical and Manufacturing Engineering, UTHM.
  • Jan 2014 – Dec 2014  : Head, Structural Integrity and Monitoring Research Group (SIMReG), Faculty of Mechanical and Manufacturing Engineering, UTHM
  • Jan 2012 – Present     : Liaison for Global Korea Scholarship for Exchange Students hosted by Dongguk University, Korea

Journal Editorship and Reviewing

  1.  Guest Editor, Journal of Applied Science and Engineering Vol. 24. (2021) (Q3, ISI indexed)
  2. Guest Editor, AIP Conference Series, Vol. 2262 (2020) (ISI indexed)
  3. Guest Editor, AIP Conference Series, Vol. 1902 (2017) (ISI indexed)
  4.  Guest Editor, Applied Mechanics and Materials, Vol. 735 (2015)
  5.  Guest Editor, Applied Mechanics and Materials, Vol. 606 (2014) (Scopus indexed)
  6.  Reviewer, Polymers, (Q1, IF 3.426)
  7.  Reviewer, Journal of Materials: Design and Applications (Q2, IF: 1.625)
  8.  Reviewer, Procedia CIRP (Scopus indexed)
  9.  Reviewer, Advances in Mechanical Engineering (Q3, IF: 1.024)
  10.  Reviewer, International Journal of Oral & Maxillofacial Implants (Q1, IF: 2.320)
  11.  Reviewer, Engineering Journal (Q2, IF: 0.228)

Chair, Conferences/international seminars

  1. Chair, 2nd International Conference on Materials and Manufacturing Engineering and Technology (CoMMET 2020), Kuala Lumpur, Malaysia, 8 – 9 December 2020
  2.  Technical Program Committee, 6th International Conference on Science, Technology, and Interdisciplinary Research (IC-STAR UTM 2020), Kuala Lumpur, Malaysia, 8 – 9 December 2020
  3.  Organizing Committee, 2nd International Conference on Materials Technology and Energy (ICMTE2019), Miri, Malaysia, 6 – 8 November 2019.
  4.  Organizing Chair, 3rd International Materials, Industrial, and Manufacturing Engineering Conference (MIMEC 2017), Miri, Malaysia, 6 – 8 December 2017.
  5.  Co-Coordinator of Local Committee, 6th International Symposium on Green Manufacturing and Applications (ISGMA 2016), Bali, Indonesia, 21 – 25 June 2016.
  6.  Organizing Co-Chair, 4th International Conference on Advanced Manufacturing Technology (ICAMT 2015), Johor Bahru, Malaysia, 20 – 22 September 2015.
  7.  Chair, 1st International Conference on Materials and Manufacturing Engineering and Technology (CoMMET2015), Seoul, Korea, 29 – 30 July 2015.
  8.  Organizing Chair, 2nd International Materials, Industrial, and Manufacturing Engineering Conference (MIMEC 2015), Bali, Indonesia, 4 – 6 February 2015.
  9.  Organizing Committee, 12th Global Conference on Sustainable Manufacturing (GCSM2014), Johor Bahru, Malaysia, 22 – 24 September 2014.
  10.  Vice Chair of Organizing Committee, 1st International Materials, Industrial, and Manufacturing Engineering Conference (MIMEC2013), Johor Bahru, Malaysia, 3 – 5 December 2013.
  11.  Technical Committee, International Conference on Mechanical Engineering (ICOME 2013), Lombok, Indonesia, 12 – 14 September 2013.

Publications/Patents

Patent

  1. Malaysian Patent Filing No. PI2019007911 Dental Implant Fixture with High Surface Area. (Filing Date: December 31, 2019).
  2. Malaysian Patent Filing No. PI 2012701073 Dental Implant Fixture. (Filing Date: December 4, 2012; lapsed).
  3. US Patent (Provisional) Application No. US 61/618,842 Dental Implant Fixture with High Surface Area and Effective Load Transfer Capability. (Filing date: 4 April 2012; lapsed)

Intellectual Property Rights

  1. Malaysian Copyright Registration No. LY2020007402 Development of Modified Analog Refractometer (Filing Date: December 28, 2020)
  2. Malaysian Copyright Registration No. LY2019008114 Finite Element Analysis of Needle Penetration on Skin: Effect of Needle Tip Shape (Filing Date: December 6, 2019)
  3. Malaysian Copyright Registration No. LY2019008113 A Comparative Study on Stress Analysis in Human Molar Tooth between a Metallic and Non-metallic Filling Material (Filing Date: December 6, 2019)
  4. Malaysian Copyright Registration No. LY2019008108 Digitalisation of Refractometer to Measure Brix Index of Produce (Filing Date: December 6, 2019)
  5. Malaysian Copyright Registration No. LY2018006445 Finite Element Analysis of Mini Implant Biomechanics on Peri Implant Bone (Filing Date: December 14, 2018)
  6. Malaysian Copyright Registration No. LY2018006444 Minimum Quantity of Lubricant Drilling of Stainless Steel using Refined Palm Olein: Effect of Coating Tool on Surface Roughness and Tool Wear (Filing Date: December 14, 2018)

Journal Articles and Proceedings/ Conference Abstracts

  • 48. F M Nor, W. H. Chin dan Kurniawan, D (2021) Finite Element Analysis Of Wound Suturing Based On Nonlinear Mechanical Behaviour Of Human Skin. IOP Conference Series: Materials Science and Engineering. [Accepted]
    47. F M Nor, Y. F. Yong dan Kurniawan, D (202X). Finite Element Analysis Of A Needle Insertion In Soft Tissue: Measurement And Prediction Of Insertion Force. Journal of Applied Science and Engineering. [Submitted]
    46. F M Nor, I. N. Kustanto dan Kurniawan, D (202X). Three-Dimensional Finite Element Analysis Of Wound Suturing With Interrupted And Continuous Techniques. Journal of Applied Science and Engineering. [Submitted]
    45. A N Sung, K S Chuah, Kurniawan, D and F M Nor (202X) Development of Modified Analog Refractometer. IEEE Transactions on Computational Imaging. [Submitted]
    44. C Bagu, H Mudin and F M Nor (2021) Design And Development An Ergonomic Transfer Lifter Assistor From Wheelchair To Bed Transfer For Patients Under 50kg. IOP Conference Series: Materials Science and Engineering. [Accepted]
    43. N W Ismail, M S Abas and F M Nor (2021) Design Of Pic Microcontroller Board Prototype For Students Practical. IOP Conference Series: Materials Science and Engineering. [Accepted]
    42. I R Abdullah and F M Nor (2021) Design And Fabrication Of Plastic Compressor Machine To Compress Plastic Waste. IOP Conference Series: Materials Science and Engineering. [Accepted]
    41. L F Zakaria, H Mudin and F M Nor (2021) Modified Thermoelectric Coolers (TEC) Peltier Plate for Outdoor Activities With Rechargeable Battery Using Solar Panel. IOP Conference Series: Materials Science and Engineering. [Accepted]
    40. A W Pai, K Senawing and F M Nor (2021) Development And Evaluation Of Livestock Feed Chopper Machine. IOP Conference Series: Materials Science and Engineering. [Accepted]
    39. H Mudin, C Bagu and F M Nor. (2021) Evaluation Of A Modified Chicken Feather Retractor Machine. IOP Conference Series: Materials Science and Engineering. [Accepted]
    38. A. Abdelrhman, Y. Lim, Y. Ali, I. Ahmad, C. Georgantopoulou, F.M. Nor, Kurniawan, D (2020) Diagnosis Model for Bearing Faults in Rotating Machinery by using Vibration Signals and Binary Logistic Regression. AIP Conference Proceedings. 2262: 030014 [ISI indexed]
    37. F.M. Nor, M.A. Sidek, D.P.B. Aji, Kurniawan, D (2020) Finite Element Analysis of Multidirectional Forging Dies for Severe Plastic Deformation of Magnesium Alloy. AIP Conference Proceedings. 2262: 030019 [ISI indexed]
    36. F.M. Nor, N. Osman, Kurniawan, D (2020) Finite Element Analysis of Repetitive Corrugation and Straightening Die Designs for Severe Plastic Deformation of Magnesium Alloy. AIP Conference Proceedings. 2262: 030017 [ISI indexed]
    36. F.M. Nor, A.L.M. Isa, Z. Zulkipli, D.P.B. Aji, Kurniawan, D (2020) Effect of Cooling Rate and Aging Duration on Microstructure of Tin-Copper Solder Joint. AIP Conference Proceedings. 2262: 070004 [ISI indexed]
    34. Z. Kwan, N.N.K. Najhan, Y.H. Yau, Y. Luximon, F.M. Nor (2020) Anticipating Local Flaps Closed-Form Solution On 3d Face Models Using Finite Element Method. International Journal for Numerical Methods in Biomedical Engineering. 36 (11) E3390. [Q2, Impact Factor: 2.097]
    33. F.M. Nor, J.Y Lim, M.N Tamin, H.Y Lee, Kurniawan, D. (2020) Effects of Starter Defect to Energy Release Rate of Three Point End Notch Flexure Tested Unidirectional Carbon Fiber Reinforced Polymer Composite. Polymers. 12: 904-916. [Q1, Impact Factor: 3.426]
    32. Hii, V.Y.M., Nor, F.M., Kurniawan, D. (2019) Scylla Serrata Shells Calcination Using Electric Furnace and Microwave Kiln. International Journal of Engineering and Advanced Technology. 8: 500-504. [ISI indexed].
    31. A.Z. Sultan, S. Sharif, F.M. Nor, D. Kurniawan, (2019) Minimum Quantity of Lubricant Drilling of Stainless Steel using Refined Palm Olein: Effect of Coating Tool on Surface Roughness and Tool Wear. Procedia Manufacturing, 30: 427-434 [ISI indexed].
    30. M. J. Hisam, I. Zaman, S. Sharif, D. Kurniawan, F.M. Nor (2019) Finite Element Analysis of Mini Implant Biomechanics on Peri-Implant Bone. Procedia Manufacturing, 30: 308-314 [ISI indexed].
    29. Hisam, M.J., Sharif, S., Suhaimi, M.A., Kurniawan, D., Nor, F.M., Shayfull, Z. (2019) Peri-implant bone biomechanics featuring short implant design. AIP Conference Proceedings. 2129: 020059 [ISI indexed]
    28. H. Osman, F.M. Nor, Y.M. Hamdan, M.N. Tamin (2017) Creep Ruptures of AISI 347 Austenitic Stainless Steel Foils at Elevated Temperature of 750℃. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 231 (6): 516–522. [Q2, Impact Factor: 1.625]
    27. F.M. Nor, H.Y. Lee, J.Y. Lim, D. Kurniawan (2016) Strain Rate and Temperature Effects on Elastic Properties of Polycaprolactone/Starch Composite. e-Polymers. 16 (3): 217–223. [Q2, Impact Factor: 0.569]
    26. I. Zaman, F.M. Nor, B. Manshoor, A. Khalid, S. Araby (2015) Influence of Interface on Epoxy/Clay Nanocomposites: 2. Mechanical and Thermal Dynamic Properties. Procedia Manufacturing. 2: 23–27. [ISI indexed]
    25. I. Zaman, F.M. Nor, B. Manshoor, A. Khalid, S. Araby (2015) Influence of interface on Epoxy/Clay Nanocomposites: 1. Morphology Structure. Procedia Manufacturing. 2: 17–22. [ISI indexed]
    24. M. H. M. Samsudin, D. Kurniawan, F.M. Nor, (2015) Strain Distribution Equal Channel Angular Pressing of Magnesium alloy at 90° and 120° Corner Angles. Procedia Manufacturing. 2: 230–235. [ISI indexed]
    23. W.Z.W. Zahari, R. Badri, H. Ardyananta, D. Kurniawan, F.M. Nor (2015) Mechanical Properties and Water Absorption Behavior of Polypropylene / Ijuk Fiber Composite by Using Silane Treatment. Procedia Manufacturing. 2: 573–578. [ISI indexed]
    22. M. J. Hisam, J.Y. Lim, F.M. Nor, D. Kurniawan (2015) Stress Distribution Due to Loading on Premolar Teeth Implant: A Three Dimensional Finite Element Analysis. Procedia Manufacturing. 2: 218–223. [ISI indexed]
    21. W. Khoo, F.M. Nor, H. Ardyananta, D. Kurniawan (2015) Preparation of Natural Hydroxyapatite from Bovine Femur Bones Using Calcination at Various Temperatures. Procedia Manufacturing. 2: 196-201. [ISI indexed]
    20. M. A. M. Soliheen, D. Kurniawan, F.M. Nor, (2015) Stress Distribution between Bonding Surface of Dental Filling in Enamel and Dentine. Procedia Manufacturing. 2: 212–217. [ISI indexed]
    19. F.M. Nor, H.Y. Lee, J.Y. Lim, M.N. Tamin, D. Kurniawan, (2014) Effect of Starter Defect to GIIC of Unidirectional CFRP Composite. Applied Mechanics and Materials. 493: 773-776. [Scopus indexed]
    18. F. Najarian, M.Y. Noordin, F.M. Nor, D. Kurniawan (2014) Analysis of Deep Hole Drilling In Presence of Electromagnetic Field Using Taguchi Technique. American Society of Mechanical Engineers. 46445: V02BT02A060 [ISI indexed].
    17. M.H.S. Elmunafi, M.Y. Noordin, F.M. Nor, D. Kurniawan (2014) Turning of Hardened Martensitic Stainless Steel with Minimum Quantity of Lubricant using Castor Oil. Proceedings of the International Symposium on Green Manufacturing and Applications (ISGMA 2014), June 24-28, Busan, Korea.
    16. F.M. Nor, D. Kurniawan, Y.J. Quan, J.Y. Lim (2013) Load Transfer Analysis on Jaw Bone Implanted with Fixture Having High Surface Area. Proceedings of the 1st International Materials, Industrial, and Manufacturing Engineering Conference (MIMEC2013), Dec 4-6, Johor Bahru, Malaysia.
    15. H. Osman, F.M. Nor, A. Borhana, (2013) Creep ruptures property of Austenitic Stainless Steel Foils at Elevated Temperature levels (750oC). Proceedings of the 1st International Materials, Industrial, and Manufacturing Engineering Conference (MIMEC2013), Dec 4-6, Johor Bahru, Malaysia.
    14. F.M. Nor, H.Y. Lee, J.Y. Lim, M.N. Tamin, D. Kurniawan (2013) Effect of Starter Defect to GIIC of Unidirectional CFRP Composite. International Conference on Mechanical Engineering (ICOME 2013), Sept 12-14, Lombok, Indonesia.
    13. F.M. Nor, H.Y. Lee, J.Y. Lim, M.N Tamin. (2013) Effects of Starter Defect To Energy Release Rate of Three Point End Notch Flexure Tested Unidirectional CFRP. 9th International Conference on Fracture & Strength of Solids. June 9-13, Jeju, Korea.
    12. F.M. Nor, D. Kurniawan, H.Y. Lee, J.Y. Lim, J.Y. (2012) Polycaprolactone/Starch Blends with Corn Based Coupling Agent: Physical Properties and In Vitro Analysis. Proceedings of the Institution of Mechanical Engineers, Part H, Journal of Engineering in Medicine. 226: 693 – 698. [Q2, Impact Factor: 1.208]
    11. D. Kurniawan, F.M. Nor, H.Y. Lee, J.Y. Lim (2012) Finite Element Analysis of Bone– Implant Biomechanics: Refinement through Featuring Various Osseointegration Conditions. International Journal of Oral & Maxillofacial Surgery. 41: 1090-1096. [Q1, Impact Factor: 1.506]
    10. F.M. Nor, D. Kurniawan, H.Y. Lee, J.Y. Lim (2012) Effect of Strain Rate and Temperature on Elastic Properties of PCL/Starch. Proceedings of the 8th Asian- Australasian Conference on Composite Materials. November 6-8. Kuala Lumpur, Malaysia: Asian-Australasian Committee on Composite Materials. [ISI indexed]
    9. D. Kurniawan, F.M. Nor, H.Y. Lee, J.Y. Lim (2011) Elastic Properties of Polycaprolactone at Small Strains are Significantly Affected by Strain Rate and Temperature. Proceedings of the Institution of Mechanical Engineers, Part H, Journal of Engineering in Medicine. 225: 1015-1020. [Q2, Impact Factor: 1.208]
    8. F.M. Nor, D. Kurniawan, Y.K. Seo, J.K. Park, S.A. Park, W.D. Kim, H.Y. Lee, J.Y. Lim (2011) Fabrication and Physical Properties of Polycaprolactone/Starch Blends with Corn Based Coupling Agent. Proceedings of the 18th International Conference on Composite Materials. August 21-26. ICC Jeju, Korea: Korean Society of Composite Materials. [Scopus indexed]
    7. M.N. Tamin, F.M. Nor, L.W. Keat, (2010) Hybrid Experimental-Computational Approach for Solder/ Intermetallic Interface Shear Strength Determination in Tin-Lead Solder Joints. IEEE Transaction on Component and Packaging Technologies. 33: 614- 620. [Q2, Impact Factor: 2.31]
    6. D. Kurniawan, F.M. Nor, H.Y. Lee, J.Y. Lim (2010) Periimplant Bone Biomechanics: Finite Element Analysis for Partial Osseointegration. Proceedings of the KSME 2010 Fall Annual Meeting. November 3-5. ICC Jeju, Korea: Korean Society of Mechanical Engineers, 4122-4125.
    5. F.M. Nor, D. Kurniawan, H.Y. Lee, J.Y. Lim (2010) Finite Element Analysis of Acupuncture Needle Insertion: Skin’s Elastic Response. Proceedings of the KSME 2010 Fall Annual Meeting. November 3-5. ICC Jeju, Korea: Korean Society of Mechanical Engineers, 4108-4110.
    4. F.M. Nor, W.K. Loh, N. Kamsah, M.N. Tamin (2008) Damage Mechanics Model for Interface Fracture Process in Solder Interconnects. Proceedings of the 10th Electronics Packaging Technology Conf. (EPTC), IEEE Xplore. 821-827 [Scopus indexed]
    3. M.N. Tamin, N. Kamsah, F.M. Nor (2008) Modeling the Mechanics of Solder/ Intermetallics Interface Fracture Process in Solder Interconnects. 2nd South East Asia Abaqus Regional Users’ Conference. Nov 10-11. Bangkok, Thailand.
    2. M.N. Tamin, N. Kamsah, Y.B. Liew, F.M. Nor (2007) Fatigue Lives of Solder Joints Subjected to Accelerated Temperature and Mechanical Load Cycles. South East Asia Abaqus Users’ Conference. Oct 29-30. Kuala Lumpur, Malaysia.
    1. M.N. Tamin, F.M. Nor (2007) Hybrid Experimental-Computational Approach for Solder/ Intermetallic Interface Shear Strength Determination in Tin-Lead Solder Joints. Int. Conf. Advanced Computational Engineering and Experimenting (ACE-X). July 12-13. Algarve, Portugal.

Theses

  1. F.M. Nor (2012) Mechanics of Damage and Fracture Process In Unidirectional CFRP Composite Laminates, Ph.D. Thesis, Dongguk University, South Korea.
  2. F.M. Nor (2009) Mechanics of Solder Joints and Solder/Intermetallic Interface under Temperature and Mechanical Loading, M.Eng. (Mechanical) Thesis, Universiti Teknologi Malaysia, Malaysia.
  3. F.M. Nor (2004) Effect of Sintering Temperature on Mechanical Properties of Al 2011-SiCp. B.Eng. Thesis, Universiti Tun Hussein Malaysia, Malaysia. In Malaysian.

Keynote/ Invited Speaker

Conferences

  1. Invited Speaker, International Academic Cooperation Expert Seminar, Department of Mechanical Engineering, Changwon National University, South Korea, February 10, 2014.
  2. Guest Speaker, International Forum on Advanced technologies (IFAT2015), Tokushima University, Japan, March 9, 2015.
  3. Invited Speaker, 5th International Conference on Industrial, Mechanical, Electrical and Chemical Engineering (ICIMECE 2019), Alana Hotel & Convention Center, Solo, Indonesia, September 17-18, 2019

Community Services

  1. Invited Speaker, Ceramah Motivasi : Membina Generasi Pelajar Cemerlang, Sek. Men. Keb. Agama Miri, Miri, Nov 2019
  2. Invited Speaker, Youth Leadership Program, Pustaka Negeri Sarawak, Miri, Jan 2019
  3. Invited Speaker, Choosing a Career Path, Park City Hotel, Miri by Rotary Club Miri, Sept 2018
  4. Invited Speaker, Choosing a Career Path, Kampung Long San, Baram and SMK Temenggong Datuk Lawai Jau, Long San, August 2018
  5. Invited Speaker, Ceramah Motivasi : Membina Generasi Pelajar Cemerlang, SMK Long Lama, Baram, July 2018
  6. Invited Speaker, Choosing a Career Path, Pustaka Negeri Sarawak, Miri, July 2018

Share this