Research and Projects

Group

Publication List for Year 2016

  • Ting Chiong Yue, Haidar F. AL-Qrimli, Hydrodynamic Analysis of Submersible Robot, International Journal of Advanced Research and Development, Volume 1; Issue 9; September 2016; Page No. 20-24. http://www.advancedjournal.com/archives/2016/vol1/issue9
  • Karam S. Khalid, and Haidar Fadhil Al-Qrimli, Examine bi-metallic rectangular thin walled tube under different trigger mechanisms, Advanced Materials Science, Vol 1(1): 4-8; (2016),   doi: 10.15761/AMS.1000102.
  • Haidar F. Al-Qrimli, Karam S. Khalid & Ahmed M. Abdelrhman, Roaad K. Mohammed, Husam M. Hadi, A Review on a Straight Bevel Gear Made From Composite, Journal of Materials Science Research, Vol. 5, No. 3; (2016). doi:10.5539/jmsr.v5n3p73.
  • Rahmat Izaizi, Firas B. I., Haidar F. AL-Qrimli, Artificial Intelligence Application in Power Generation Industry: Initial considerations. IOP Conf. Series: Earth and Environmental Science 32 (2016) 012007. DOI: http://dx.doi.org/10.1088/1755-1315/32/1/012007.
  • Jung, H.C. and Krumdieck, S., Meanline design of a 250 kW radial inflow turbine stage using R245fa working fluid and waste heat from a refinery process, Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, (2016). (ISI, IF 0.645)
  • Sujan D., Reddy, M.M. and Qua S.Y. (2016) “Influence of cutting fluid conditions and cutting parameters on surface roughness and tool wear in turning process using Taguchi method”, Measurement, Vol 78, pp 111-119.
  • Haidar F. AL-Qrimli, Ahmed M. Abdelrhman, Husam M. Hadi, Roaad K. Mohammed, Hakim S. Sulta, Three Dimensional Spur Gear Static Contact Investigation Using Finite Element Method. Canadian Journal of Modern Applied Science; ISSN 1913-1844; Vol. 10, No. 5; (2016).

Publication List for Year 2015

  • Haidar F. AL-Qrimli, Reflective practice and traditional lecture styles, Borneo Post 22 December 2015. http://www.theborneopost.com/2015/12/22/reflective-practice-and-traditional-lecture-styles/.
  • Haidar F. AL-Qrimli, A. A. Oshkour, Firas B., Fadhil Abbas Mahdi, Material Design Consideration for Gear Component Using Functional Graded Materials. International Journal of Materials Engineering Innovation. Vol. 6, No. 4, (2015).
  • O. Nabinejad, D. Sujan, M. E. Rahman, and Ian J. Davies “Determination of filler-content for natural filler polymer matrix composite by thermogravimetric analysis” Journal of Thermal Analysis and Calorimetry, Springer
  • O. Nabinejad, D. Sujan, M. E. Rahman, and Ian J. Davies “Effect of oil palm shell powder on the mechanical performance and thermal stability of polyester composites” Materials and Design.
  • M. M. Reddy, A. Gorin, K.A. Abou-El-Hossein, D. Sujan “Modeling of Temperature Distribution when Machining Inconel 718 in Turning process” Power Electronics and Energy Engineering.
  • Haidar Fadhil Al-Qrimli, Haider A. Almurib, Nandha Kumar, Carbon/epoxy woven composite experimental and numerical simulation to predict mechanical performance, Journal of Advances in Materials Science and Applications AMSA, Vol.4,pp.33-41, (2015).
  • P. R. K. Fu, Z. Oo, D. Sujan “Microstructure analysis, physical and thermal properties of Al2O3-Al2TiO5 functionally graded ceramics for the application of car brake rotor” JST Vol. 23 (1).
  • Haidar F. Al-Qrimli, Haider A. Almurib, Nandha Kumar, F. A. Mahdi, Dynamic Analysis of a Straight Bevel Gear Composite Structure, Journal of Material Sciences & Engineering, ISSN: 2169-0022 JME. Vol.4:1, (2015).
  • Haidar F. AL-Qrimli, Karam. S. Khalid, Fadhil A. Mahdi, The effect of cone angle on composite tubes subjected to axial loading, British Journal of Applied Science & Technology, Science Domain International. 7(4), BJAST.2015.152, ISSN: 2231-0843, (2015).
  • Law M C, Lee V C C and Tay C L, 2015. Dynamic Behaviors of a Molten Carbonate Fuel Cell under a Sudden Shut-down Scenario: The Effects on Temperature Gradients. Applied Thermal Engineering. 82, pp 98-109. ISSN 1359-4311.
  • Reddy, M.M., Sujan D. and Lee L.C. (2015) “Modeling of Temperature Distribution when Machining Inconel 718 in Turning process”, Power Electronics and Energy Engineering, pp 207-210.

Publication List for Year 2014

  • D. Sujan, M. M. Reddy and S. Y. Qua (2014) “Environmental friendly cutting fluids and cooling techniques in machining: A review” Journal of Cleaner Production, Elsevier, Vol. 83 pp 33-47
  • O. Nabinejad, D. Sujan, M. E. Rahman, M.M. Reddy, Willey Y. H. Liew and Ian J. Davies (2014) “The effect of alkali treatment of OPKS filler on mechanical property of polyester-composite” Advanced Materials Research Vol. 980 pp 86-90
  • Ng Samuel, D. Sujan, M. E. Rahman, O. Nabinejad and M. M.  M. Reddy (2014) “Oil Palm Fibre and Nano-Silica Reinforce d Epoxy Composite Material” Advanced Materials Research Vol. 980 pp 23-27
  • Y. R. Loh, D. Sujan, M. E. Rahman, C. A. Das (2013) “Sugarcane bagasse-The future composite material: A literature review” Resources Conservation and Recycling, Elsevier, Vol 75, pp 14– 22
  • M. E. Rahman, A. S. Muntohar, V. Prakash, B. H. Nagaratnam, D. Sujan (2014)  “Self compacting concrete from uncontrolled burning of rice husk & blended fine aggregate”, Materials and Design. Elsevier, Vol 55, pp 410-415
  • D. E Woldemichael, J. J. Lai, D. Sujan (2014) “Topology optimization of beam structures with various end loading conditions”, Applied Mechanics and Materials, Vol. 465-466, pp 22-26
  • D. Sujan, C. W. Nguong, S. N. B. Lee, M. Gizaw (2014) “Wear properties of oil palm cellulose fibre reinforced polymer composites”, Advanced Materials Research, Trans Tech Publications Ltd, Vol. 845, pp 81-85
  • D. Sujan, T. K. Piaw, D. E Woldemichael (2014) “Thermo-mechanical stress analysis in electronic packaging with continuous and partial bond layer”, Applied Mechanics and Materials, Vol. 465-466, pp 50-54
  • D. Sujan, X. B. Pang, M. E. Rahman, M. M. Reddy (2014) “Performance of solder bond on thermal mismatch stresses in electronic packaging assembly” Materials Science Forum, Vol. 773-74, pp 242-249
  • M. M. Reddy, A. Gorin, K.A. Abou-El-Hossein, D. Sujan (2014) “Machinability of aluminum nitride ceramic using TiAlN and TiN coated carbide tool insert” Materials Science Forum, Vol. 773-774, pp 437-44.
  • Lee V C C, Gan H S, Abakr Y A and Woo K C, 2014. Bulk Flow Behaviour of a Two-Stage Impedance Pump. Engineering Letters. 22(2), pp 53-62. ISSN 1816-0948.
  • Reddy, M.M., Alexander, G., Abou El, H.K.A. and Sujan, D. (2014) “Machinability of Aluminum Nitride Ceramic using TiAlN and TiN Coated Carbide Tool Insert”, Materials Science Forum, 773-774: 445-455.

Publication List for Year 2013

  • M. G. Zewge, T. A. Lemma, A. A. Ibrahim, D. Sujan, “Modeling and Simulation of a Heat Recovery Steam Generator Using Partially Known Design Point Data”, Advanced Materials Research, Vol 845, pp. 596-603, Dec. 2013
  • Y. R. Loh, D. Sujan, M. E. Rahman, C. A. Das (2013) “Sugarcane bagasse-The future composite material: A literature review” Resources Conservation and Recycling, Elsevier, Vol 75, pp 14– 22
  • C. W. Nguong, S. N. B. Lee, D. Sujan (2013) “A review on natural fibre reinforced polymer composites” World Academy of Science, Engineering and Technology, Vol 73, pp 1123-1130
  • M. M. Reddy, A. Gorin, K.A. Abou-El-Hossein, D. Sujan (2013) “Surface roughness model when machining aluminum nitride ceramic with two flute square end micro grain solid carbide end Mill” Advanced Materials Research, Trans Tech Publications Ltd, Vol. 747, pp 282-286
  • L. J. Fei, D. Sujan (2013) “Origami theory and its applications: A literature review” World Academy of Science, Engineering and Technology, Vol 73, pp 1131-1135
  • D. Sujan, K. P. Ting (2013) “Closed form bi-layered interfacial thermal stress model in electronic packaging” International journal of Advanced Materials Manufacturing and Characterization (IJAMMC)
  • L. Lancaster, M. H. Lung, D. Sujan (2013) “Utilization of agro-industrial waste in metal matrix composites: towards sustainability” World Academy of Science, Engineering and Technology, Vol 73, pp 1136-1144.
  • Lee V C C, Abakr Y A and Woo K C, 2013. Valveless Pumping Using A Two-Stage Impedance Pump. Frontiers in Mechanical Engineering. 8(3), pp 311-318. ISSN 2095-0241.

Research Projects, 2013

  1. Simulation of combustion in a spark-ignition engine cylinder using ECFM combustion and knock models (supported by AVL)
  2. Multi-objective maintenance management using nature-inspired optimization algorithm: Application to industrial gas turbines
  3. LES simulation of cycle-to-cycle variation of in-cylinder air flow in naturally aspirated and highly boosted SI engines
  4. Utilization of agro-industrial waste based silica particles in aluminium metal matrix composite material
  5. CFD modeling of dual-fuel engine combustion using natural gas and syngas (supported by AVL)
  6. Energy and material assessment for a combined cycle power plant
  7. Design and development of subsonic wind tunnel
  8. A 3D finite element modeling and simulation of turning process
  9. Magnetohydrodynamics
  10. Simulation of particle-embedded flow through a porous media
  11. The study of the impact of BHA deflection on wellbore positional accuracy
  12. Characterization of the mechanical properties of fractal based structural design
  13. Chip Morphology with FEA and simulation in turning of stainless steel 1045
  14. CFD modeling on hydrodynamics of binary mixture fluidized bed
  15. Hybrid intelligence approach to surface roundness parameter prediction

For full list of 2013 research projects, please click here.

Share this