Tina Ting Chui Huon

Tina-300x452

Dr. Tina Ting Chui Huon
BEng, PhD
Senior Lecturer
Civil & Construction Engineering

Contact Details
Telephone: +60 85 443939 extn: 2507
Fax: +60 85 443837
Location: Skylark 3 (SK3) Room 356
Email tina.ting@curtin.edu.my

Background

Tina has been with Curtin Sarawak since 2014. She graduated with PhD in Structural Engineering from Curtin University in 2014. Her undergraduate was in Civil and Construction Engineering from Curtin University. Her research focuses on the area of cold-formed steel.

Academic History

  • PhD in Structural Engineering, Curtin University, 2014
  • BEng in Civil & Construction Engineering, Curtin University, 2009

Research Interests

  • Cold-formed steel

HDR Supervision

  • Co-supervisor for Ms Kok Ka Yee, PhD candidate, “Optimum Design of Locally Produced Cold-formed Steel Residential Roof Trusses”. Completion October 2018
  • Co-supervisor for Mr Yong Pei Ming, MPhil candidate, “Finite Element Modeling of Cold-formed Steel Walls under Elevated Temperature”. Completion February 2019

Publications

Book Chapters

  1. Roy, K., Ting, T.C.H., Lau, H.H., Lim, J.B.P. (2019) Experimental investigation into the behavior of CFS built-up channels subjected to axial compression, Lecture Notes in Civil Engineering 34: 89 – 105 (SCOPUS)
  2. Roy, K., Ting, T.C.H., Lau, H.H., Lim, J.B.P. (2019) Finite element modelling of built-up CFS channel columns under axial load, Lecture Notes in Civil Engineering 34: 65 – 87 (SCOPUS)

Journal Papers

  1. Roy, K., Lau, H.H., Ting, T.C.H., Masood, R., Kumar, A., Lim, J.B.P., 2019. “Experiments and finite element modelling of screw pattern of self-drilling screw connections for high strength cold-formed steel”, Thin-Walled Structures (In Press) (Clarivate)
  2. Roy, K., Ting, T.C.H., Lau, H.H., Lim, J.B.P. (2019) Experimental and numerical investigations on the axial capacity of cold-formed steel built-up box sections, Journal of Constructional Steel Research 160: 411 – 427 (Clarivate)
  3. Roy, K., Ting, T.C.H., Lau, H.H. (2018) Effect of thickness on the behavior of axially loaded back-to-back cold-formed steel built-up channel section – Experimental and numerical investigation, Structures 16: 327 – 346 (Clarivate)
  4. Roy, K., Ting, T.C.H., Lau, H.H., Lim. J.B.P. (2018) Nonlinear behavior of back-to-back gapped built-up cold-formed steel channel sections under compression, Journal of Constructional Steel Research 147: 257 – 276 (Clarivate)
  5. Ting, T.C.H., Roy, K., Lau, H.H., Lim, J.B.P. (2018) Effect of screw spacing on behavior of axially loaded back-to-back cold-formed steel built-up channel sections, Advances in Structural Engineering 21(3): 474 – 487 (Clarivate)
  6. Roy, K., Ting, T.C.H., Lau, H.H., Lim, J.B.P. (2018) Experimental investigation into the behavior of back-to-back gapped built-up cold-formed steel channel sections under compression, Wei-Wen Yu International Specialty Conference on Cold-Formed Steel Structures 2018 – Recent Research and Developments in Cold-Formed Steel Design and Construction: 283 – 297 (SCOPUS)
  7. Kok, K.Y., Lau, H.H., Phan, T.D., Ting, T.C.H. (2018) Design optimization for cold-formed steel residential roof truss using genetic algorithm, World Journal of Engineering 15(5): 575 – 583 (Clarivate)
  8. Roy, K., Ting, T.C.H., Lau, H.H., Lim, J.B.P. (2018) Nonlinear behavior of axially loaded back-to-back built-up cold-formed steel un-lipped channel sections, Steel and Composite Structures 28(2): 233 – 250 (Clarivate)
  9. Ting, T.C.H., Lau, H.H. (2016) Finite element analysis of axially loaded cold-formed steel back-to-back channel built-up sections, Steel and Aluminium Structures (Clarivate)
  10. T.C.H. Ting & H.H. Lau, 2011. “Compression Test on Built-up Back-to-back Channels Stub Columns”, Advanced Materials Research Vols. 201-203 (2011) pp 2900-2903. (SCOPUS)

Conference Papers

  1. K Roy, HH Lau, TCH Ting, JBP Lim, 2019. “Recent development in cold-formed steel structures research” International Conference on Recent Tends in Construction Materials and Structures (ICON2019), Vellore Institute of Technology (VIT), Vellore, India – 18-20, September 2019.
  2. K Roy, TCH Ting, HH Lau, Bhatnagar, S, JBP Lim, 2019. “Finite Element Modeling of Back-to-Back Built-Up CFS Un-Lipped Channels under Axial Compression”, Materials Science Forum, Vol. 969, pp. 819-827, 2019.
  3. K Roy, TCH Ting, HH Lau, JBP Lim, 2019. “Improved Design Rules on the Buckling Behaviour of Axially Loaded Back-to-Back Cold-Formed Steel Built-Up Channel Sections”, 9th International Conference on Steel and Aluminium Structures (ICSAS19) Bradford, UK, 3-5, July, 2019.
  4. K Roy, TCH Ting, HH Lau, JBP Lim, 2019. “Nonlinear Behaviour of Axially Loaded Back-to-Back Built-Up Cold-Formed Austenitic Stainless-Steel Channel Sections”, 9th International Conference on Steel and Aluminium Structures (ICSAS19) Bradford, UK, 3-5, July, 2019.
  5. K Roy, TCH Ting, HH Lau, JBP Lim, 2018. “Numerical investigation and parametric study on the behaviour of axially loaded back-to-back gapped built-up cold-formed steel channels”, Ninth International Conference on Advances in Steel Structures (ICASS2018), 5-7 December 2018 – Hong Kong, China.
  6. K Roy, TCH Ting, HH Lau, JBP Lim, 2018. “Compression Tests On Back to Back Gapped Built Up Cold Formed Steel Channel Sections”, International Conference on Engineering Research and Practice for Steel Construction 2018 (ICSC2018) Hong Kong, China, 5-7 September 2018
  7. K Roy, TCH Ting, HH Lau, JBP Lim, 2018. “Effect of Screw Spacing into The Behaviour of Back to Back Cold Formed Duplex Stainless Steel Built Up Channel Sections Under Compression”, International Conference on Engineering Research and Practice for Steel Construction 2018 (ICSC2018) Hong Kong, China, 5 to 7 September 2018
  8. K Roy, TCH Ting, HH Lau, JBP Lim, 2017. “Nonlinear behaviour of back-to-back built-up cold-formed steel channel columns under compression – finite element modelling and parametric study”, 4th International Conference on Advanced Steel Structures, November 09-10, 2017 Singapore.
  9. K Roy, TCH Ting, HH Lau, JBP Lim, 2017. “Behaviour of Axially Loaded Back-to-Back Cold-Formed Steel Built-Up Channel Sections”, 4th International Conference on Advanced Steel Structures, November 09-10, 2017 Singapore.
  10. T.C.H. Ting & H.H. Lau, 2016. “Finite Element Analysis of Axially Loaded Cold-Formed Steel Back-To-Back Channel Built-Up Sections”. The 8th International Conference on Steel and Aluminium Structures ICSAS 2016, Hong Kong, China. 7-9 December 2016.
  11. T.C.H. Ting, H.H. Lau, & M. S. Joo, 2016. “Numerical Analysis Of Axially Loaded Cold-Formed Steel Built-Up Box Section” The Third Australasia and South-East Asia Structural Engineering and Construction Conference, ASEA-SEC 2016, Kuching Sarawak. 31 October – 4 November 2016.
  12. T.C.H. Ting & H.H. Lau, 2016. “Finite Element Analysis Of Axially Loaded Cold-Formed Steel Back-To-Back Channel Built-Up Sections”. The 8th International Conference on Steel and Aluminium Structures ICSAS 2016, Hong Kong, China. 7-9 December 2016.
  13. T.C.H. Ting & H.H. Lau, 2015. “Design of Axially Loaded Cold-formed steel Gapped Back-to-back Channel Built-up Sections using Thickness Reduction Method (TReM)”. 11th International Conference on Advances in Steel & Concrete Composite Structures, ICASS 2015, Tsinghua University, Beijing, China. 3-5 December 2015.
  14. T.C.H. Ting1, H.H. Lau1, 2014. “Design of cold-formed steel back-to-back C-channel built-up columns using modified Direct Strength Method” Recent Advances in Steel and Composite Structures 2014, Hong Kong.
  15. T.C.H. Ting1, H.H. Lau1, 2014. “Thickness reduction method (TReM) for axially loaded cold-formed steel back-to-back C-channel Built-up Columns Part 1: Design” 7th International Conference on Thin-walled Structures (ICTWS) 2014, Busan, Korea.
  16. T.C.H. Ting1, H.H. Lau1, 2014. “Thickness reduction method (TReM) for axially loaded cold-formed steel back-to-back C-channel Built-up Columns Part 2: Experiment” 7th International Conference on Thin-walled Structures (ICTWS) 2014, Busan, Korea.
  17. T.C.H. Ting1, H.H. Lau2, 2012. “Effects of the Plate Slenderness Ratio on Built-up Back-to-back Channel Stub Columns” 1st (ASEA-SEC), Perth, Australia.
  18. T.C.H. Ting1, H.H. Lau2, 2011. “A Numerical Investigation on Cold-formed Steel Built-up Back-to-back Channel Stub Columns” 7th International Conference on Steel & Aluminium (ICSAS), Kuching, Sarawak, Malaysia.
  19. T.C.H. Ting1, H.H. Lau2, 2011. “Compression Tests on Cold-formed Steel Built-up Back-to-back Channels Stub Columns” 2nd International Conference on Manufacturing Science and Engineering (ICMSE), Guilin, China.
  20. T.C.H. Ting1, H.H. Lau2, M.C. Law3, 2010. “Compression Tests on Cold-formed Steel Lipped C-Channel Columns – Short Column” World Engineering Congress 2010 Conference on Engineering & Technology Education, Kuching, Sarawak, Malaysia.
  21. H.H. Lau1, T.C.H. Ting1, F.E. Tang, C.C. Mei, 2010. “Applications Of Cold-Formed Steel Built-Up Sections In Building Construction” 3rd International Symposium on Cold-formed Metal Structures, Hong Kong, China.
  22. H.H. Lau1, T.C.H. Ting2, 2009. “Load Carrying Capacity of High Strength Cold-Formed Steel Built-Up Box Sections” 4th International Conference on Steel & Composite Structures, Sydney, Australia.
  23. H.H. Lau1, T.C.H. Ting1, 2009. “An Investigation of the Compressive Strength of Cold-Formed Steel Built-up I Sections” 6th International Conference on Advances in Steel Structures, Hong Kong, China.

Professional Association

Registered with Board of Engineers Malaysia (BEM)
Graduate member of Institution of Engineers, Malaysia (IEM)